Floor Screed

Floor screed is one of those little-known trade secrets that doesn’t get nearly as much attention as it deserves. Essentially, it is an evenly blended mix of cement and sand which gives a level surface to which final flooring (eg tiles, wood flooring, carpet) can be affixed.Read more :https://fibrereinforcedscreed.co.uk

The thickness of a floor screed can vary depending on its use and the amount of load it will be bearing, and must always be appropriate for each individual project. It also needs to be cured correctly, and in the right conditions, which will ensure it achieves an adequate mechanical resistance and has a good level of reflective finishing, and that it is free from surface contamination such as dust and dirt.

Exploring the Different Types of Screed Flooring

Generally, screed is laid over in-situ concrete. In such cases, the surface should be completely clean, and any laitance or contamination that may be present on the base concrete should be removed by means of a suitable mechanized system. This will also allow the screed to bond with the concrete, allowing it to strengthen and hold its shape better, and reduce any movement.

There are two main types of floor screed. A traditional floor screed is pre-mixed and delivered to the site in a mixer truck, and pumped onto the ground using a hose. This is a quick and efficient process, and it can usually be completed in less than an hour. The other option is a liquid floor screed that is mixed at the factory and delivered to the site in a tanker, and then poured on-site using a hose.

Leave a Reply

Your email address will not be published. Required fields are marked *